Categories

System glitches and false alarms can be frustrating, and even more concerning, could prevent your home’s security from working how it should. Fortunately, most troubles, from false alarms to dead batteries, are straightforward to correct. Explore our recommendations for troubleshooting your home alarm system in Santa Clarita. We’ll help keep your household safe and your system running properly.

Test Your Home Security System In Santa Clarita

One great way to troubleshoot your home’s security is to test it yourself! Newer systems let you place them in test mode to avoid initiating an emergency call. After moving to test mode, take these steps:

• Arm your system as you would when leaving.
• Open a door or window that uses a contact sensor, or test other equipment. Close the door or window so it doesn’t prompt the alarm as you reactivate the system.
• Let the alarm resonate for 60 seconds to make sure a message is dispatched to the security company and an entry is created in the alarm system log.
• Proceed to test equipment as you wish
• Review the system activity log to validate proper function.

No need to worry, monitoring specialists can see that your system is undergoing a test. Just be sure to switch out of test mode when complete. It’s wise to test once a month or anytime you adjust your home’s internet or phone provider.

Evaluate The Positioning And State Of Motion Sensors

Although an essential aspect of your alarm system, motion detectors are well known for false alarms. Do your part to prevent them with a few straightforward troubleshooting steps.

• Conduct a visual check. Are there items that could move within range of the sensor, like a curtain taken by a breeze?
• Is the sensor dirty? Cobwebs, dirt, and debris can lead to malfunctions. Make sure the sensor is clean.
• Does the motion detector offer pet immunity you can activate? Some models can be set to disregard pets weighing as much as 100 pounds.
• When was the battery changed? A nearly depleted battery may affect performance or cause false alarms.
• Is a heat source affecting the sensor? Too much heat from a fireplace, direct sun, or something else can cause an alarm.

Keep Batteries Ready And Look Out For Low Battery Signals

One of the great advantages of new home security systems is that they’ll tell you when batteries are getting low. If your system has a app or control panel, you’ll typically find messages there. Depending on your system, you might hear an intermittent beep when batteries are low. 

Motion sensors, contact sensors, smoke detectors, and other wireless tools have batteries that will have to be replaced every so often. It’s a good idea to keep batteries around and create a replacement schedule. Some systems also have a rechargeable backup battery for the central control panel. This backup battery helps keep your system running if you lose power and should recharge once power is restored. If it doesn’t recharge, you will need to replace it.

Troubleshooting Is Simple With ADT Home Security In Santa Clarita 

As the leading name in home security, ADT creates systems that offer unrivaled functionality and protection. Switching to test mode is simple through the ADT+ app or MyADT.com, and you’ll always receive updates when a sensor battery is running low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system perfectly suited to your Santa Clarita home and family. Dial (661) 231-0767 or submit our form today!